Our Work
.JPG/:/rs=w:370,cg:true,m)
Our Process - New surface
step 1
step 1
step 1
New court surfacing requires an Acid wash to etch and clean the concrete. Next, a pressure wash is required to remove any debris, dirt, and chemicals. An adhesion promoter will then be applied to ensure the base coat can adhere to the concrete
step 2
step 1
step 1
Whether it be a new surface or an existing surface, a base coat will then be applied. This layer is typically black in color. This helps visualize and ensure a consistent application process and typically takes a few hours to cure, depending on the weather.
Step 3
step 1
Step 3
The 3rd phase is spent applying color coats to the black base coat. This layer contains finer sand and will require an hour between each application. Two coats are applied per color. Next, measurements are taken and chalked, and the lines are primed and painted.